The wide format digital printer suddenly stopped working during the printing process. This problem is believed to have been encountered by many users. Many times, the printer is still unable to move when a picture is about to be printed. This wastes material and causes economic losses. It often happens that people are also very crippled.
In fact,want to solve the problem of a wide format printer is also very simple. In order to solve this problem, I specially asked the company's printer printing technical engineer today, so let me explain the specific situation to everybody.
When a digital inkjet printer suddenly stops working, it is usually caused by the following reasons. By step by step, you can find the final reason.
1. The effect of static electricity.
Check to see if your ground wire meets the standard. A standard-compliant ground wire is a must for wide format printers.
2. Many times the data cable connected to the computer will also cause the print to stagnate.
In this case, it is usually necessary to re-plug the data cable. If it still doesn't work, you can go to the mall to buy the same print line and try it.
3. The most likely cause of this problem is that the computer motherboard settings are incorrect.
The job of the printer is to have a requirement for the computer configuration. If the computer configuration is too low or does not match the applicable model on the printer instructions, then of course it is prone to printing problems, and may not even work at all.
4, if the above methods have been tried or not, then you have to change the motherboard and memory of digital printer. As a last resort, try not to use it. First, check the above problems step by step, and then make sure that there is no problem, then replace the motherboard and memory. Or simply ask the repair master to come to the door for repair.
No comments:
Post a Comment