What Sublimation Textile Printer Technical Knowledge Do Technicians Need to Know?

What kind of knowledge should a sublimation textile printer operator know? The printer manufacturer hereby shares with you some knowledge that the printer operator should operate the machine. The knowledge that the operator should know is as follows:

1.When starting up the sublimation printer, you must first turn on the power switch, then turn on the servo power switch; turn it on according to the switch sequence, and reverse the operation when shutting down.

2.During the operation of the device, the nozzle is clogged. Press the PAUS button to pause the inkjet operation, clean the nozzle, and continue printing after cleaning, and observe the effect at any time.

3.When the system software displays various print parameters, please check the settings carefully. Make sure that the settings are correct before printing.

4.Digital printer professional operators must develop good work habits, maintain and maintain the inkjet printer nozzles after daily work, and strictly maintain the operating environment around the machine.

5.After the printer is not working, the operator needs to clean the nozzle panel, sprinkle the cleaning solution, cover with a plastic wrap, and keep the vacuum. After turning off the power, be sure to unplug the power cord to avoid damage to the nozzle caused by static electricity.

6.Always check the ink tank in the ink supply cabinet to check if the ink is sufficient and replace the ink filter regularly.

7.Always check the clean lubrication of the guide rails and guide rails, and lubricate the guide rails with oil.

8.Clean and maintain the nozzle after daily work, and clean the ink cartridge and ink level sensor regularly.

9.Check various circuit connectors, screws, etc., observe whether it is loose, and pay attention to adjust the tension of the timing belt.

10.Regularly remove dust from computers, power supplies, and circuit boards. The floor in the work shop is often cleaned and kept clean.

11.Responsible for keeping the original equipment files (equipment manual, warranty service card, purchase certificate, etc.) for inspection.

12.Develop good work habits, operate equipment strictly according to procedures, and prohibit illegal operation. Any illegal operation, deduct points according to the relevant regulations of the company.