When using a sublimation digital printer, sometimes it is clear that there is paper in the printer, but the printer always prompts that there is no paper, which may cause it to be used abnormally. This makes many people feel trouble. So, how do we deal with this problem?
Each sublimation printer is equipped with a sensor that measures the presence or absence of paper. This sensor is called a paper detector. If the part is in error, there is a problem that the paper cannot be tested. If an error occurs in daily work, we can solve it by the following steps:
1. The cable of the printer's paper measuring device is not inserted. If the cable is not plugged in, the digital printer will report the message "Internal ERROR shutdown Bad carriage paper senso". At this time, check if the toilet paper and the ink cartridge cart are connected correctly.
2. There is shredded paper not taken out. This problem is most common, as long as the excess shredded paper is removed.
3. The sensor is dirty. Use a cotton swab dipped in alcohol to clean the sensor.
4. The paper detector is not installed correctly. Remove the paper detector and reinstall it on the printer to solve the problem.
5. The paper detector burns out. The paper measuring machine is not expensive for dozens of pieces, and you can buy one again and replace it.
In order not to affect the use of the digital sublimation printer, the user can periodically check and clean, and the chance of failure is reduced to a minimum. In addition, users are advised to purchase several paper detectors just in case.
No comments:
Post a Comment