When Does Sublimation Textile Printer Need to Use Cleaning Solution?

The cleaning solution used in the sublimation textile printer is a kind of “detergent” formulated according to the characteristics of the ink. The main functions are strong scouring ability, solvency, and better fluency of the ink in the pipeline. Below I will introduce the conditions under which the cleaning solution is used and then how to use the cleaning solution correctly.

 

First, when the sublimation fabric printer is newly installed since each machine is loaded with ink before leaving the factory, there is also a protective liquid in the pipe and ink head. The solubility of the ink in the protective liquid is not as strong as that of the cleaning liquid, and the protective liquid has some influence on the fluidity of the ink, and the phenomenon of drawing (in the high-quality mode) and the oblique flow of the ink hole often occurs. Therefore, when we install the machine, we must use the cleaning fluid to clean the pipeline. Avoid the phenomenon of drawing and ink hole oblique spraying.

Second, use the cleaning solution to clean the blade and ink pad regularly to the digital sublimation printer every week. Pure water and alcohol have low solubility in ink, and alcohol has a slight corrosive effect on the blade. Therefore, we recommend that you do not use pure water or alcohol to clean it.

 

Third, regularly use the cleaning solution to clean the pipeline of the sublimation transfer printer, recommended (3-6 months). When the ink is used for a long time, there will be deposits on the wall of the tube, and the attached matter will affect the fluency of the ink, and the cleaning liquid has a strong solubility to the attached matter, so the pipeline should be cleaned regularly.

Fourth, sometimes the working environment is relatively poor, the static electricity of the machine is relatively strong, and many cotton-like dust will adhere to the surface of the ink head. If it is not cleaned for a long time, the ink hole will be obliquely sprayed and blocked. The cleaning nozzle is periodically dropped into the ink pad to make the printer nozzle moisturizing better.

Large Format Sublimation Printer-Solutions for Not Recognizing the Ink Cartridge

In the process of using the large format sublimation printer, we will find that the ink cartridge cannot be recognized by the printer after the printer has been deactivated for a period of time. Even if we reloaded the cartridge many times, the printer still could not be recognized, and the replacement of the electric shock belt had no effect.

In fact, for users of dye sublimation printers that use continuous ink supply, it is a headache to encounter such problems. So how do you solve the problem that the printer does not recognize the ink cartridge?

After analyzing the causes of common faults, we finally came to the conclusion that the main reason for this may be because the printer’s waste ink tank is full. For this reason, we have given the following solutions:

In fact, for every part of an inkjet printer, it will be more or less lossy over time. The same is true for sublimation inkjet printers, which have fixed accessory life settings. When some accessories reach the end of their life, the printer will prompt that they cannot print.

Since the digital sublimation printer is easy to form waste ink during use, it is easy to cause the waste ink to be full. In this case, you can do two things: use the zeroing software to reset the printer motherboard to eliminate the printer settings; or replace the ink cartridge. Here we recommend users to adopt the latter. Because it is simply a simple zero, it is easy to cause the waste ink to leak and burn the machine.

Wide Format Sublimation Plotter Maintenance Tips in Daily Use

The wide format sublimation plotter manufacturer stated that no matter what kind of printer, it is necessary to pay attention to maintenance in daily use, so as to maximize the service life of the machine and reduce the cost. So how should the printer be maintained?

The maintenance tips for the sublimation plotter are as follows:

1. When transporting the printer, be sure to fix the car of the ink cartridge. It is not allowed to slide the car freely to prevent the accessories of the ink cartridge from being damaged, resulting in wear of the nozzle.

 

2. When the sublimation printing machine is not working, be sure to stop the spray in the spot (do not continue to flash for more than three hours) or moisturize the nozzle (the nozzle should not be exposed to air for more than 15 minutes when it stops working) ), because the volatility of the ink is large, the ink on the nozzle is quickly dried, which easily blocks the nozzle.

3. When there is a broken needle when printing, please do not rush to clean the nozzle. First, move the spray to the cleaning position to see if there is any ink under the nozzle or the fiber material is hanging at the nozzle. After confirming the cause of the broken needle of the nozzle, the nozzle is treated accordingly.

 

4. Ensure that the working environment of the wide format sublimation printer is ventilated, clean, and avoid direct sunlight to the ink supply system of the machine. The ink supply system must be sealed. The air filter must be added to the place where the atmosphere is connected. The equipment workplace should reduce dust as much as possible. The venue is guaranteed to be mopped once a day.

5. When the machine is not working, the car must be moved to the moisturizing position, and the nozzle should be moisturized with a moisturizing seat. The nozzle should not be directly exposed to the air without moisturizing.

Eco-Solvent Advertising Printer - Precautions For Printing Materials Selection

In order to make a high-quality advertisement with an eco-solvent advertising printer, Except for the perfect design in advance, choosing advertising materials is also very important. We all know that based on the premise of the printer, the material determines the quality and longevity of an inkjet advertisement.

The key points to select digital eco-solvent printer printing materials are as follows:

 

Choosing better printing material for the advertising inkjet printer will allow you to easily achieve the perfect print performance. For example, when choosing the medium for outdoor inkjet advertising, the car sticker is good in adhesion and anti-sunlight; outdoor crepe printing media is suitable for more romantic and elegant display occasions.

In the choice of indoor advertising materials, such as canvas for more romantic and elegant display, there is a certain oil painting texture, can be used for wedding photography, etc.; PP film is exquisite gel, high precision, but there is no self-contained rubber surface, customers can use double-sided adhesive tape on the wall, can be used multiple times; exquisite paper, high precision, no self-adhesive rubber surface.

 

The setting of the size of the advertising inkjet image of the flex banner printer also needs everyone’s attention. Usually, in the design of the indoor and outdoor inkjet advertisements, it is necessary to predict the size of the advertisement, and select the medium according to different material media. Because the size of the printing material is 0.914, 1.07, 1.27, and 1.52 meters wide, it is recommended to use a 2cm smaller than the raw material, or it can be imprinted. It should be noted here that try not to set useless white edges, which is also the calculation of consumables and production costs, which can effectively reduce the cost of production.

Five Reasons for the Discoloration of Digital Sublimation Fabric Printers

Sometimes the digital sublimation fabric printer will have a unique print colour. Why is there a coloration cast? Here I will quickly introduce the motives for everyone.There are 5 most important motives for the printer’s colour cast:

First, if you prefer to compare, you can’t assume the dye-sublimation printer to print the identical color as the computer, due to the fact the display is RGB genuine color, huge shade gamut; the inkjet printer is CMYK false color, so the colour gamut is narrow. The software computerized conversion mode will drop some colors, which is normal. The accepted solution is to regulate the colour forged by way of decreasing the amount of yellow in the Y channel, fine-tuning each time and then adjusting it multiple times. Of course, you can additionally ask the grasp to assist you modify the curve, and shop it after satisfaction, simply spend some money, there are specialised technicians responsible for processing the image.

Second, coloration distortion is also associated to laptop coloration management, display resolution, digital printer resolution, and print media. The distinction in display resolution and printer resolution can additionally end result in a shade solid of the printed color. So attempt to pick out to edit and print the photo at the equal resolution. At the same time, the switch fee of the print medium will additionally have an effect on the colour of the pattern printed on the paper. Therefore, it is also vital to choose a transfer paper of high first-class and excessive switch rate.

Third, if you want to set up four or greater nozzles for sublimation inkjet printers, please test if they are the equal brand. Because the ink shade of the equal manufacturer of printer has a suitable complementarity and coordination, therefore making sure the replica of its color.

Fourth, check if the sublimation printer nozzle is broken or if the massive ink bottle is out of ink. If the ink is missing, the printed coloration will of course fade. At the identical time, it is additionally indispensable to test whether the printing method is adjusted to the ink saving mode, and if it is not indispensable to save ink, it ought to be again to the everyday mode.

Fifth: Please test the mode of Photoshop is RGB or CMYK before printing. When printing the picture with the printer, exchange the mode of the image to CMYK, so that the color of the printed photo will be seen on your computer. The colours are the same.

Large Format Digital Printer Ink Tube Maintenance Recommendations

When we use large format digital printers, we will inevitably encounter various failure problems. Many users do not pay attention to maintenance when using the machine, which often causes the printer to be inoperable, which delays time and wastes money. If the ink tube of the printer fails, the machine will not work. How to maintain the ink tube of the printer?


● For large format eco-solvent digital printer

Since the eco-solvent ink has a certain volatility, the machine does not need to be easily plugged for a long time. Please follow the steps below to maintain the ink tube of the machine:

1. Before shutting down, please drop the special cleaning solution into the ink stack cap to do a cleaning. Then print the test strip to check that the nozzle is in normal condition. Then put the trolley in the ink stack, put the nozzle height in the low position and shut down normally.
2. It is recommended to print the nozzle test strip every day to check whether the nozzle is clogged. If there is any blockage, please perform the cleaning operation to ensure that the nozzle is in good condition.
3. If your machine has been out of service for more than 3 days, clamp the two ink tubes under the ink cap with clips and add some cleaning solution to the ink cap to ensure that the surface of the nozzle is not wet. Ensure that the nozzle is cleaned once every 3 days.


● For large format sublimation digital printer

1. Before the machine is deactivated, print the test strip to check that the nozzle is in the normal state, then place the trolley in the ink stack, put the nozzle height in the low position, and shut down normally.
2. It is recommended to print the nozzle test strip every day to check whether the nozzle is clogged. If there is any blockage, please perform the cleaning operation to ensure that the nozzle is in good condition.
3. If your machine has been out of service for more than 10 days, clamp the two ink tubes under the ink cap with clips and add some pure water to the ink cap to ensure that the surface of the nozzle is not wet.

Why Does UV Digital Inkjet Printer Appear Chromatic Aberration?

UV digital inkjet printers can not only achieve personalized printing, suitable for all sizes of printing, but also can be applied in a wider range of printing, and why UV printers will have color difference, I will introduce it to you today.

1. Picture problem: Before using the UV printer to print a pattern for the media, the operator needs to process the pattern to be printed until the desired effect is achieved, and then the printing will start. However, if we are in the process of image processing, the color of the pattern is damaged due to processing errors, and the printed effect will be greatly different from the actual effect. Therefore, it is best for the printer operator to perform a prototype test before printing until the desired result is achieved before the official print. This saves material and prints product effects that satisfy customers in the shortest amount of time.

2. Ink problem: The quality of the printing ink is the key to directly reflecting the final effect. If the ink quality of the UV digital printer is too poor, it is difficult to print out the effect of the customer's demand. There are many types of UV inks on the market today, so it is difficult to make a decision when purchasing. At this time, the best choice is to contact the printer manufacturer directly, using the special ink recommended by the universal printer manufacturer, which can save a lot of trouble, but also reduce the gap in the printing effect.

3. Printer problem: To print out the customer's demand as quickly and efficiently as possible, the performance of the large format UV printer itself is the most important role in the printer process. A product printed by a high-stability, high-precision UV printer is not easy to appear. The case of chromatic aberration. The higher the printing accuracy of the nozzle used by the printer, the more realistic the effect of printing, and the less the difference between the printing effect and the actual required effect.

What Are the Mistakes In Saving Cost of UV Large Format Printers?

Because the UV large format printer itself and the consumables are relatively expensive, each UV printer user is thinking about how to better maximize the value of the UV printer. So users will save UV printer printing costs in a variety of ways, but often these methods are debatable. There are two major misunderstandings about the common cost savings of UV printers.

1, Cheap is equal to saving

In the hearts of many UV digital printer users, the Cheap and the Savings are equal. In order to save costs, we must shop around and purchase the cheapest consumables. The consequences of this way of thinking are quite serious. It can be said that printing consumables that are obviously lower than the market price generally have problems.

For example, low-cost original consumables are likely to be counterfeit products, and low-cost general consumables are also inferior. Even if you buy fake and shoddy products, there are many specifications for consumable products on the market, including large-capacity consumable products and normal commercial products, as well as small-capacity trial products.

2, Shut down at any time vs long-term boot

In terms of savings, there are two opposite statements, that is, the UV inkjet printer is turned off at any time and turned on for a long time. People who hold the former view believe that the printer should be shut down immediately after use, which saves energy and extends the life of the printer. Supporting long-term startup means that the impact current of each switch will affect the life of the printer. The machine self-test may consume consumables, so the printer should be turned on for a long time, and it can be turned off at most when you get off work.

It should be said that these two arguments have certain truths, but there are also some misunderstandings. The misunderstanding of the use of the switch is to ignore the damage caused by the self-test and the current of the switch, and the printer will warm up when the switch is turned on. Power consumption is much larger than during standby. Therefore, frequent switching machines may not achieve the purpose of energy-saving and life extension.

The misunderstanding of long-term startup is to ignore the impact of standby power consumption and heat on energy-saving and machine life. At the same time, in the long-term standby process, in order to ensure normal printing, the printer will still self-test regularly, and it may still consume consumables.

In order to reduce the printing cost of UV printer, we should seek a balance between the two statements, that is, reduce the number of times the printer is turned on and off. If there is a print task in a short time, it is not suitable to shut down. It is not possible to have a print job within an hour, then shut down, and it is more appropriate to turn it on again when the print job is in progress.

How to Reduce the Error of Digital Sublimation Printer Image Stitching?

Many digital sublimation printer users will encounter incorrect image stitching problems when printing with a wide format printer. What caused this? How should we avoid it?

To solve the problem of stitching images of wide-format sublimation printers, we mainly start from the following three aspects.

1. When you drawing the picture, you need to cut the picture according to the correct size, so as to avoid material waste caused by the splicing error after the picture is drawn. Try to consider the dimensional error after the sublimation inkjet printer prints out. When the picture is cut, if the first picture comes out, the printed picture can be printed without any errors. One thing to note is that the screen should be rotated 180° when printing, starting from the end, in order to prevent errors.

2. Before using the sublimation transfer printer for official printing, first use the drawing software such as Photoshop, CorelDRAW, etc. to import the JPG image into the cut. It is recommended that the gap between the images be kept within 2 cm when cutting. If there is no gap, we can choose a smaller area. Also, avoid cutting out patterns such as text, because the fonts are easy to see and spliced ​​and misplaced.

3. When splicing the screen, be sure to put the output screen first, and then use the splicing machine or related glue to flatten the bean noodles.

Above are 3 advice to help you avoid the image stitching problem, have a try!

Sublimation Digital Printer-Why Ink is Difficult to Dry After Printing Image

After the printing of the picture by the sublimation digital printer, what is the reason why the ink does not dry for a long time? How should it be solved? Today, we will analyze and solve such a problem for you.

There are several reasons why the digital sublimation printer prints pictures for a long time:

First, it has something to do with the quality of the printer's ink.
The quality of the sublimation printer's ink is the most direct cause of the speed of the printed picture. Good quality ink can speed up the drying time of the picture, and the poor quality ink does not have excellent fast drying.

Second, the problem of the heating system of the dye-sublimation printer itself, the heating system of the printer itself helps to speed up the drying time of the picture, so it is very important to choose a good quality printer when purchasing the printer.
Then, if the printer has already printed the image and the ink is not easy to dry, how should we solve it?

There are two solutions to the first situation: one is that you choose a good quality large format sublimation printer ink, which speeds up the drying of the picture. Another way is to help you with a small fan on the side of the picture. Dry. Both methods can solve this problem.

The solution to the second reason is to find the relevant technicians to test. If your heating system is broken, you need to replace the heating system or replace the new one. If there is no heating system, you need to find the manufacturer's technology. The person installs a heating system.

Dye-Sub Printer-Precautions When Using Ink Tube for Long Time

Dye-Sub Printer needs to periodically clean the internal ink tubes, because after a long period of use, the particulate matter in the ink gradually accumulates, which may block the ink tubes. A special printer cleaning solution can be used to clean the ink tubes. The cleaning solution is a kind of "detergent" formulated according to the characteristics of the ink. Its main function is to have a strong flushing ability, a dissolving ability, and a better fluency of the ink in the pipeline. Let me briefly explain how to use the cleaning solution correctly:

First, when new dye-sublimation printers are installed, it should be noted that before each machine is shipped, the machine is filled with ink, and there are protective liquids in the pipes and ink heads. The solubility of the ink in the protective liquid is not as strong as that of the cleaning liquid, and the protective liquid has some influence on the fluidity of the ink, and the phenomenon of drawing (in the high-quality mode) and the oblique flow of the ink hole often occurs. Therefore, we require that the cleaning fluid must be used to clean the pipeline when the machine is newly installed. Avoid the phenomenon of drawing and ink hole oblique spraying.

Second, use the cleaning solution to clean the wiper and ink pad of the sublimation printer regularly every week. Pure water and alcohol have low solubility in ink, and alcohol has a slight corrosive effect on the blade. Therefore, we recommend that you do not use pure water or alcohol to clean it.

Third, regularly use the cleaning solution to clean the ink line of the digital sublimation printer. It is recommended to clean it once every 3-6 months. When the ink is used for a long time, there will be deposits on the wall of the tube, and the attached matter will affect the fluency of the ink, and the cleaning liquid has a strong solubility to the attached matter, so the pipeline should be cleaned regularly.
Fourth, sometimes the working environment is relatively poor, the static electricity of the machine is relatively strong, and many cotton-like dust will adhere to the surface of the ink head. If it is not cleaned for a long time, the ink hole will be obliquely sprayed and blocked. Regularly drip the cleaning into the ink pad to make the ink head more moisturizing.