Digital Sublimation Printer-Several Steps to Replace the Printer Motor

The motor is an indispensable part of the digital sublimation printer. If there is no motor, the printer will not work properly, so when the motor is damaged, it needs to be replaced with a new one. The correct operation of the machine can only be guaranteed if the motor is replaced correctly. So what are the steps to properly replace the motor of a digital printer?

In fact, the method of replacing the large format sublimation printer motor is very simple, you can replace it by following the steps below:

 

Step 1. Disconnect the power first, then use a screwdriver to remove the cover of the printer.

Step 2: It is necessary to remove the relevant connecting wires of the dye sublimation printer motor. (Before disassembling, you should know how these wires are connected, so that you do not connect the wrong one when replacing the new one. This is easy to cause damage to the motor and the mainboard.)

Step 3. Remove the drive belt. Note: Do not use too much force to avoid damage to the motor.

Step 4. Remove the old motor and install a new motor.
Replace thesublimation printing machine motor for these four steps, I hope everyone can operate correctly. Need to remind everyone that in the process of disassembling the motor, you only need to use a screwdriver to use this tool. Never use a tool such as a hammer to strike, which is very easy to damage the printer.