The wide format sublimation plotter manufacturer stated that no matter what kind of printer, it is necessary to pay attention to maintenance in daily use, so as to maximize the service life of the machine and reduce the cost. So how should the printer be maintained?
The maintenance tips for the sublimation plotter are as follows:
1. When transporting the printer, be sure to fix the car of the ink cartridge. It is not allowed to slide the car freely to prevent the accessories of the ink cartridge from being damaged, resulting in wear of the nozzle.
2. When the sublimation printing machine is not working, be sure to stop the spray in the spot (do not continue to flash for more than three hours) or moisturize the nozzle (the nozzle should not be exposed to air for more than 15 minutes when it stops working) ), because the volatility of the ink is large, the ink on the nozzle is quickly dried, which easily blocks the nozzle.
3. When there is a broken needle when printing, please do not rush to clean the nozzle. First, move the spray to the cleaning position to see if there is any ink under the nozzle or the fiber material is hanging at the nozzle. After confirming the cause of the broken needle of the nozzle, the nozzle is treated accordingly.
4. Ensure that the working environment of the wide format sublimation printer is ventilated, clean, and avoid direct sunlight to the ink supply system of the machine. The ink supply system must be sealed. The air filter must be added to the place where the atmosphere is connected. The equipment workplace should reduce dust as much as possible. The venue is guaranteed to be mopped once a day.
5. When the machine is not working, the car must be moved to the moisturizing position, and the nozzle should be moisturized with a moisturizing seat. The nozzle should not be directly exposed to the air without moisturizing.
No comments:
Post a Comment