For the sublimation digital printer, the nozzle plug is a common fault. The printer is a large-format wide-format inkjet printer. It uses piezoelectric inkjet technology or thermal foaming technology, and the plugging fault also exists. Today is a brief description of whether the printer plug and voltage instability have an impact?
When using the digital sublimation printer for daily use, it is often found that the printer has a plug, especially when the printer is temporarily suspended for a long time and the maintenance work of the nozzle is not performed. But will these faults be related to piezoelectrics? When the printer is working with unstable voltage, will it cause the printer to plug frequently?
There is no direct relationship between the voltage and the nozzle plug, but the voltage is unstable and it is easy to burn the nozzle circuit, such as the damage of the motherboard, and in serious cases, the nozzle circuit may be damaged. If the voltage is unstable in the environment where the printer is used, it is recommended that the user install a voltage regulator for the printer, and it must be installed so that the nozzle can be better protected.
Therefore, the voltage is unstable and will not plug, but it will lead to a sharp shortening of the life of the nozzle, even directly burning the nozzle, especially the thermal foaming printer. However, whether it is a wide format sublimation printer or the latest piezoelectric piezoelectric printer, it is recommended to install a voltage regulator for the printer, and the earlier it is used, the safer it is, and the addition of a stabilizer is not expensive.
The damage of the nozzle is not lost due to the unstable voltage. The thermal foaming nozzle is good, and its price is not expensive. However, if the nozzle is damaged due to voltage problems, it is also a headache. Large format piezoelectric printers use Epson's piezo nozzles, which are the core components of printers, and their quality is critical to printers.
No comments:
Post a Comment