Dye Sublimation Printer-What's the Function of Feathering When Printing?

When dye sublimation printers are printing out, there is a feathering setting in the printing function that is often used in our operations. How much do you know about the important role of feathering print settings in printer graphics output? What is the role of the feathering function when the printer is drawing?

Many digital sublimation printers will set the corresponding feathering value when they work. There are three kinds of feathering methods: large, medium and small. For example, our company's series of printer products support feathering. The emergence of the feathering function has increased the fault tolerance of the printer when printing. This function is mainly to correct the error of the pass path and make the printed finished picture more beautiful.

When the dye inkjet printer prints out the images, using the feathering function to print the settings, it can effectively prevent the pass channel from being generated, because the pass channel cannot be eliminated after it is generated, which will affect the effect of the image, and if the depth is too deep, the customer cannot Accept this effect. At the same time, the opening of the feathering function also has an important role, it is to prevent the waste of ink, to achieve ink-saving printing, although the ink is not expensive, but the accumulation of consumables for a year is also a very substantial cost.

Although the large feathering situation will have a relatively large impact on the printing speed of the textile sublimation printer, the corresponding printing accuracy and drawing resolution will be greatly improved! If you are not too eager to print speed, it is best to open the feathering operation, which can make you work more worry-free, and also hand over the works that make customers more satisfied. The feathering printing method can make the printer more beautiful, and can realize the finished product image and satisfactory image color effect that the customer likes, which can naturally bring more profits to your inkjet printing business.

Eco Solvent Printer Application In Supermarkets And Shopping Mall

The display and promotion of merchandise advertisements is the marketing method used by shopping malls, and the eco solvent printer can realize high-precision advertisement image printing and output of indoor and outdoor. It is aimed at merchandising, merchandise posters, promotional cards, window displays and decorations for large supermarkets,and has very  good application.

The application of the solvent based printer can realize high-precision and high-resolution image printing and output, and its high cost performance is presented by its bright and colorful colors and colorful expressions.

In the marketing plan of the shopping mall, the promotion plan of the goods and the design concept of the designer's personality, the ingenious product advertising and propaganda concept, through the graphic design of the promotional goods, make the inkjet advertisement display more attractive to consumers and achieve better publicity effect.

Maybe when you enter the mall, you can see these high-precision printer printing applications everywhere. For example, shopping mall exterior wall advertising inkjet, KT board tag printing, signage inkjet, elevator advertising inkjet, lobby banner hanging banner printing, floor sticker adhesive printing, supermarket pillar printing, supermarket fruit and vegetable map printing, fresh aquatic vegetable printing, supermarket stacking Inkjet, door-to-door new year inkjet, light box inkjet printing, promotional advertising inkjet, ultra-thin lightbox inkjet, background wall inkjet, cashier printing, display rack printing, roll-up printing, pull-net display printing, portrait bracket printing, outdoor giant poster printing, etc. Spray painting. These are printers for large-scale shopping malls and supermarkets.

Therefore, the application of the digital solvent inkjet printer in our daily life is very extensive. It is also very helpful to choose a high-quality printer to improve our work efficiency and achieve higher profits.

Sublimation Digital Printer-Whether the Stability of the Power Supply Can Affect it?

For the sublimation digital printer, the nozzle plug is a common fault. The printer is a large-format wide-format inkjet printer. It uses piezoelectric inkjet technology or thermal foaming technology, and the plugging fault also exists. Today is a brief description of whether the printer plug and voltage instability have an impact?

When using the digital sublimation printer for daily use, it is often found that the printer has a plug, especially when the printer is temporarily suspended for a long time and the maintenance work of the nozzle is not performed. But will these faults be related to piezoelectrics? When the printer is working with unstable voltage, will it cause the printer to plug frequently?

There is no direct relationship between the voltage and the nozzle plug, but the voltage is unstable and it is easy to burn the nozzle circuit, such as the damage of the motherboard, and in serious cases, the nozzle circuit may be damaged. If the voltage is unstable in the environment where the printer is used, it is recommended that the user install a voltage regulator for the printer, and it must be installed so that the nozzle can be better protected.

Therefore, the voltage is unstable and will not plug, but it will lead to a sharp shortening of the life of the nozzle, even directly burning the nozzle, especially the thermal foaming printer. However, whether it is a wide format sublimation printer or the latest piezoelectric piezoelectric printer, it is recommended to install a voltage regulator for the printer, and the earlier it is used, the safer it is, and the addition of a stabilizer is not expensive. 

The damage of the nozzle is not lost due to the unstable voltage. The thermal foaming nozzle is good, and its price is not expensive. However, if the nozzle is damaged due to voltage problems, it is also a headache. Large format piezoelectric printers use Epson's piezo nozzles, which are the core components of printers, and their quality is critical to printers.

Sublimaiton Textile Printer-Precautions When Using Printer Accessories

For sublimation textile printers, in addition to the most important nozzle parts that require good maintenance, there are many other parts that require us to pay more attention to maintenance in daily use. Today I will take you to know which important printer accessories are needed for us to print:

1, printer grating: Some friends often use alcohol to clean the grating, the original grating is not a problem, but because of anti-corrosion, you will not necessarily change the grating. Today's accessory gratings of sublimation printer are not made of anti-corrosion inks, alcohol will corrode the grating strips, and the grating will be scrapped after a long time. Usually use a dry cloth to wipe the line, it is not clean and then use water or alcohol.

2, the textile printer copper sleeve: the original copper sleeve is made of metal softening treatment, and added graphite in the copper to make it smooth, but the domestic copper sleeve will never do this, the cost is too high. If you use it, you must oil it, or you are grinding the big shaft. The easiest thing is to wipe the shaft with a cloth dipped in liquid oil. It is also possible to use high-temperature solid smooth oil for fine machinery, but do not use butter (high temperature and humidity requirements, easy to dry)

3, printer ink tube: ink tube must be used to prevent corrosion, this is very important, and the wall of the anti-corrosion tube will be thicker, can prevent cracking

4, printer printing cable: this must not be long, it is best to shield

5, printer ground: the ground wire of digital sublimation printer should be connected to the metal plate of the power supply

6, printer wiring board: the use of a complete line of high-quality wiring board with insurance.

Textile Sublimation Printer Does't Work After Being Idle for Too Long

If the textile sublimation printer is not used for a long time, it may cause the problem that it will not work properly when it is turned on again. A customer called to respond to us, his printer was deactivated for nearly a month, and then went to print the image and could not print. Why is this?

In fact, like other electronic products, sublimation digital printer is not suitable for idle too lang time, which will cause problems in various parts, especially nozzles and inks. If it is not used for a long time, it is recommended that you remove the nozzle and ink and clean it for storage.

The sublimation textile printer is useless for a long time. Pay attention to cleaning the inside of the machine when starting up. For example, blow the dust inside with a hair dryer. If it doesn't work properly, most of the reason is the problem of the nozzle. Check the nozzle. Here, I would like to remind everyone that if the printer is not used for a long time, seal the nozzle with plastic wrap, otherwise it will not be used for a long time.

Specific method: Take the nozzle off, clean it and wrap it in plastic wrap. Wipe the machine oil on the machine guide and put on a dust cloth. Finally, put the printer in a cool, dark place.

Sublimation Fabric Printer-Why Ink Car Stop Moving When Printing

When we use a sublimation fabric printer, sometimes we find that the printer's ink car has a pause when moving back and forth, not smooth, and the printing speed is slower. Regardless of the cause, the printer prints slower, which affects the user's operating costs and profits. 

In order to enable customers to achieve the highest profit, not only to avoid equipment failure, but also to pay attention to the usual maintenance and cost control. If there is a pause when the ink cart moves back and forth during printing, the problem of slow printing speed should be solved as soon as possible. So why does the ink car stop when we use sublimation printer?

We first analyze the reasons for this situation, mainly due to the following factors:

The speed of RIP is too slow, which leads to insufficient transmission data; the computer transmission speed is slow; setting the number of times of printing too little, and the matching with RIP is not equal, which may cause the printing speed to be slow. Because the number of prints per line can significantly affect the data transmission needs, the fewer the number of prints, the more information is needed.

The corresponding solution is very simple, mainly through the following ways:

Improve RIP speed, improve computer processor and optimize PPC overall matching performance. You can also close other unnecessary programs and only run RIP to load bitmap image files; read the RIP manual carefully, such as some settings (image mode, mirror/no mirror, mask/cancel mask, rotate, layer/no Layers, etc.) may affect print speed and quality; there is also a change in the number of prints, recommended as "5".

According to the above method, the ink vehicle can be basically solved and normal printing of fabric sublimation printer can be resumed.

Digital Inkjet Printer-What is the Problem with the Nozzle Not Ejecting Ink?

In the process of printing pictures with a digital inkjet printer, sometimes the ink dot abnormalities appear suddenly, such as large ink droplets, and small ink droplets cannot be ejected. Epson's five-generation nozzle has ink droplet control detection function. There is an error message when the ink droplet control is abnormal, but there is no prompt when printing, and a small ink droplet cannot be ejected. What should I do if I encounter such a problem?

There are several reasons for this problem on inkjet printer, such as nozzle failure, printer driver problems, RIP software problems, printer motherboard failure. You can use the exclusion method to check and confirm the problem. After confirming the problem, let's share the solution:

1. The nozzle is faulty; there may be a blockage of the nozzle, which can be cleaned by using the cleaning function. If the problem is still there, it should be sold later and solved.

2, the digital printer driver problem; this is better to solve, after the driver is uninstalled, restart the computer, and then install the original driver from the new, if the uninstall is not clean, you can install the driver from the system.

3, RIP software problems; can be reloaded after uninstalling like the driver, remove the genuine software, replace the genuine software, generally many problems are caused by pirated software.

4, the printer motherboard failure; this is more troublesome, the need for manufacturers to provide technical support, good after-sales manufacturers will immediately send someone to replace the motherboard.

Inkjet Sublimation Printer-Solution for Excessive Air in the Ink Supply Tube

When using an inkjet sublimation printer, if too much air is introduced into the system, there is a high probability that the ink will occasionally break during printing. When this happens, many users will be overwhelmed and think that the nozzle is faulty. In fact, it is not that serious. So, if this happens, how can we solve it?

There are many reasons why the sublimation printer supplies air to the system's ink supply conduit, so I won't go into details here. Once the ink tube has air, it will affect the normal use of the printer. Let me share some simple solutions below:

First turn off the digital sublimation printer switch to the system to prevent ink leakage, and then remove the inner box. Cover the inner box without air with the ink cartridge cover, and also cover the vent hole of the corresponding outer box. Turn on the connected box switch and raise the outer box gradually. In fact, the ink with air is poured back into the cartridge. After cleaning the air, close the connected external box switch, install the inner and outer boxes again, then start the cleaning system of the printer twice, and finally open the air filter and the outer box switch.

Remember not to use a syringe to pump air, which will disrupt the balance of the system and cause ink to leak.

Sublimation Inkjet Printer-Several Elements of That the Nozzle are Vulnerable

The nozzles of sublimation inkjet printer are often prone to wear, what is the reason? In addition to the quality problems of the nozzle itself, there are several reasons for the nozzle wear of the printer:

1. Air in the pipe
Sublimation printer often encounter ink to flow back to the left ink supply bin due to loose contact between the pipe and the ink head in the printer or air leakage from the ink head, causing the ink head to burn. If there is a bubble in the process of filling the ink, the ordinary burning will cause a short circuit, thus causing the entire group of nozzles to fail.

2. Static interference
Excessively boring working environment will directly generate a large amount of static electricity, directly forming damage to the ink circuit; or using printing materials, especially when using plastic-based materials such as PP and adhesive media, it will generate a lot of static electricity; damage the ink head or Causes accumulation of impurities to form ink head infarction damage.

3. External voltage
The external voltage of the inkjet printer is too high or unstable, which may cause the machine to burn out the print head or not recognize the print head.

4. Not paying attention to operation and maintenance
Regarding the Epson series of print heads, the direct cause of the damage is physical damage, that is, due to the warping of the medium such as paper, the metal hole sheet at the bottom of the print head is scratched during the printing process, and the print head nozzle holes are damaged, and the radiation is not normally emitted.

5. Ink quality
The ink contains a variety of chemical components, often due to inaccurate filtration, thin and high, moisturizing liquid, etc., forming a print head.

Sublimation Digital Printer-What is the Best Way to Preserve the Nozzles?

For sublimation digital printer, the print head is one of the most important parts of the printer, and usually the price of a print head will be very expensive. Therefore, users should pay more attention to maintenance when using the printer's nozzle, and try to reduce the damage of the nozzle. So, how can we better save the nozzle?

1. If sublimation printer has not much printing work, the customer can put the nozzle on the machine, as long as the ink is added with alcohol paper (preferably not to shed hair), wipe the crystal block of the nozzle, and absorb the ink. You can suck it up.

2. If the digital printer print job is completed, and it has not worked for several days or know that the nozzle is not used, and the nozzle will be aging, it is recommended to take the printer nozzle off the machine. Please note that the nozzle should be placed horizontally (the nozzle chip is up) so that the ink does not come out, then wipe the nozzle with alcohol, preferably with an ink absorber. Some people will ask, isn't it afraid that the nozzle will age for a long time? Please put the blue ribbon back on the nozzle. Also, don't let the nozzles shine on the sun and clean the nozzles. Add a small amount of water to solve the general paste, ink plug and so on.

Also note that the printer's ground wire must be connected.

The method of correct grounding: connect the ground wire (copper wire, diameter 4mm) connected to the metal body of the digital sublimation printer to the underground 1.5-2m deep, water the salt water around, and ground it separately from the computer ground wire. Do not connect the ground wire of the computer to the printer. Grounding through the printer, such that the computer chassis power leakage or discharge will damage the printer's electrical accessories or nozzles. There are many benefits to the grounding wire, such as preventing the printer from dispersing ink, preventing the car from suddenly suspending, and personal safety issues.

Wide Format Sublimation Printer-How to Choose Paper Collection Machine

Choosing paper collection machine for wide format sublimation printer will make our usual printing work easier and more convenient. This not only saves the trouble of manual delivery after the printing is completed, but also avoids the blurring of the pattern when the printed paper ink does not dry out and contacts the ground or other places.

So what should you pay attention to when choosing the paper collection machine for a sublimation printer?

At present, there are many manufacturers of paper delivery machines of digital printer in China. Most of the users basically use the damper type slipping and winding retractor. What is damping? The various frictions and other impeding effects that attenuate free vibrations are called damping. The "special" components placed on the structural system provide the resistance to motion and the means of consuming the kinetic energy, which we call dampers.

The advantage of this type of delivery device is that it has a simple structure, is not expensive to manufacture, and is inexpensive, but the disadvantage is that it is prone to problems, and it is impossible to wind up excessive printing medium, etc., which is also due to the structure of the delivery device. It is decided that because the torque is too large, it will affect the material's tensile deformation. If the torque is too small, it may not carry the heavy material. 

In addition, the motor of the delivery is also worth noting, because the motor always maintains rotation to keep the material in tension during printing. Once the motor stops, the printed image cannot be kept tight. If it stops, turn it on again. , the media that can be wound can not be flattened and affect the print quality. In this case, the motor life is too short and the motor is easily damaged.

In addition, there is a tension bar type induction delivery device. The advantage of this delivery device is that the structure is reasonable, the winding paper is flat, and it can drive heavier printing materials, and because of the inductive work, the working time of the motor Very limited, so it guarantees that the service life of the motor will be very long and not easy to break. Although the price will be more expensive, the tension bar type inductive delivery device has become the new generation of wide-format printers with its excellent performance. The preferred equipment for paper.

Digital Sublimation Printer-How to Do If Square Appears When Printing?

When using a digital sublimation printer, do you have a problem with the grid break when printing pictures? Are you still worried about how to avoid the use of broken squares when drawing pictures? Do you still think this is a difficult problem to solve? Today, here, I will tell you how to avoid the experience and operation of the printer when the printer is broken, and share the communication skills with the printer.

First of all, we must first understand why the digital printer breaks the ink when the printer is drawing. Only by understanding the source of the problem can we find a better solution.

There are three problems that cause the printer to break the ink when drawing the picture. They are:

1. The track is dirty, causing the car to deviate.

2. The ink cartridge of the printer is less than a quarter of the ink, the ink cannot be pumped up, or the ink is higher than three-quarters, and the ink will overflow.

3. There is water or ink leakage between the printer nozzle and the electric shock belt.

The solution is also very simple, just do these three things every day:

1. Wipe the guide rails with sewing machine oil every day.

2. Check the amount of ink in the printer's ink cartridges daily, not less than a quarter, or more than three-quarters.

3. Dry the printer nozzle between the sublimation printer head and the electric shock strap with a dry rag.

Above are some solutions to the problems about the squares appear in the picture when printing, hope it would be a help for you.

Wide Format Inkjet Printer-Do You Know How to Add Ink to it?

In the process of using a wide format inkjet printer, ink refilling is one of the common operations. How much ink is left in the ink? What issues should I pay attention to when ink cartridges are refilled? Today, let me share with you some things to pay attention to during the process of refilling.

When you add ink to an inkjet printer, you should see if the ink cartridge is completely damaged. You can test it with water beforehand. If there is no water leakage, you can safely add ink. If you need to renew the ink, you should thoroughly clean the original ink cartridge, otherwise there will be a mixture of two different inks to produce a chemical reaction, resulting in plugging.

Some users use the cleaning function that comes with the digital inkjet printer for convenience. In fact, this is not good. It is best to wash it several times with water until you see clear water. When changing ink, it must be in moderation. Some users need to add ink to each other in order to save trouble. This will cause the ink cartridge to leak ink during use, and the leaked ink may wet other parts inside the printer. Parts that are so damaged as the printer.

After loading the ink, it is best not to put the ink cartridge back into the ink cartridge holder, let it sit for a few minutes and then put it on, so that the ink will slowly penetrate into the corners of the sponge pad to ensure the ultimate print quality. There is also the need to avoid exposing the ink cartridge to the air for a long time, which makes it easy to produce dry clogging.

Finally, remind the majority of wide format printer users, do not wait until the ink is used up, it is best to add ink to the ink cartridge when there is 10% left in the ink. If you can't see the remaining amount of ink, then you have to observe from the printing effect and find the print. If there is a broken line in the image, you should add ink.