Dye Sublimation Printer’s nozzle is the most important part of the whole printer, once damaged, the whole printer can not work. If the printer nozzle meet the problem that do not spray ink when we print, it is really a headache.
Today, I will take you to know several reasons why the printer nozzle does not spray ink, and the corresponding solution to the problem.Hope these a little help for you.
Reasons for not spraying ink
1.Printing time interval is too long, resulting in print head dry.
2.Seal unopened, air can not enter the ink cartridge.
3.Wash the print head many times for a long time.The broken line position in test is consistent.
4.Print head has worn or worn out.
Corresponding solutions
1.It is recommended to print a full-color document every week.
2.Tear off the seal and reassemble the ink cartridge.
3.Use a syringe to clear the nozzle or clean the nozzle with a clean cartridge
4.The print head needs to be replaced.
The cleaning method of sublimation printer’s nozzles
Except for above resolutions,here introduce cleaning method of nozzles of sublimation printer in detail to help you maintain your printer.
Light clogging: Right click on the printer and select "print preferences - clean the print head 3-5 times.
Moderate clogging:Directly use a 5 ML medical syringe to pump the cleaning liquid into the nozzle to soak nozzle.
Serious clogging:Remove the print head and soak the print head with a proper amount of cleaning liquid for 2-3 hours, then drain the cleaning liquid on the nozzle with a paper towel.
Notice: Do not wet the circuit after cleaning the print head. After installation, do not turn on the power immediately.
No comments:
Post a Comment