How to Make a Personalized Car Sticker with the Eco-Solvent Printer?

In the advertising inkjet industry, eco-solvent printer can be used to print a wide range of materials, such as car stickers and banners. Among them, car stickers are more commonly used in the automotive industry, especially high-grade sports cars are often seen with a cool pattern, very domineering.

Do you want to know how to make a personalized car sticker with a large format eco-solvent printer? Do you know how to use the printer to give your car a beautiful DIY car sticker?

Here we introduce the steps in details:

 

First collect the relevant materials, use PS to process the pictures you want to print according to your own personality, and then use the solvent based printer to print on the car stickers (you can also use pp stickers instead). Here, you should use the highest precision mode to print, because the car stickers are also very close to the distance. If the accuracy is not enough, the effect will be bad, and the pattern will be blurred and affect the appearance.

After printing the pattern by digital eco-solvent printer, the car will be coated with a cold heading machine. The post-peritoneal lightness is better, and the picture can be protected from scratching, and it is more upscale. Cut the root pattern and remove the unwanted parts, so that the personalized car sticker is finished (don’t forget to clean and maintain the printer)

 

Finally, clean the car, wipe it dry, and then stick the car sticker. Be careful not to leave air when you stick it. After it is attached, you can choose to dry according to the weather. This personalized car sticker is created and posted.

How are you learning? Hurry and experiment with the printers around you!

When Does Sublimation Textile Printer Need to Use Cleaning Solution?

The cleaning solution used in the sublimation textile printer is a kind of “detergent” formulated according to the characteristics of the ink. The main functions are strong scouring ability, solvency, and better fluency of the ink in the pipeline. Below I will introduce the conditions under which the cleaning solution is used and then how to use the cleaning solution correctly.

 

First, when the sublimation fabric printer is newly installed since each machine is loaded with ink before leaving the factory, there is also a protective liquid in the pipe and ink head. The solubility of the ink in the protective liquid is not as strong as that of the cleaning liquid, and the protective liquid has some influence on the fluidity of the ink, and the phenomenon of drawing (in the high-quality mode) and the oblique flow of the ink hole often occurs. Therefore, when we install the machine, we must use the cleaning fluid to clean the pipeline. Avoid the phenomenon of drawing and ink hole oblique spraying.

Second, use the cleaning solution to clean the blade and ink pad regularly to the digital sublimation printer every week. Pure water and alcohol have low solubility in ink, and alcohol has a slight corrosive effect on the blade. Therefore, we recommend that you do not use pure water or alcohol to clean it.

 

Third, regularly use the cleaning solution to clean the pipeline of the sublimation transfer printer, recommended (3-6 months). When the ink is used for a long time, there will be deposits on the wall of the tube, and the attached matter will affect the fluency of the ink, and the cleaning liquid has a strong solubility to the attached matter, so the pipeline should be cleaned regularly.

Fourth, sometimes the working environment is relatively poor, the static electricity of the machine is relatively strong, and many cotton-like dust will adhere to the surface of the ink head. If it is not cleaned for a long time, the ink hole will be obliquely sprayed and blocked. The cleaning nozzle is periodically dropped into the ink pad to make the printer nozzle moisturizing better.

Large Format Sublimation Printer-Solutions for Not Recognizing the Ink Cartridge

In the process of using the large format sublimation printer, we will find that the ink cartridge cannot be recognized by the printer after the printer has been deactivated for a period of time. Even if we reloaded the cartridge many times, the printer still could not be recognized, and the replacement of the electric shock belt had no effect.

In fact, for users of dye sublimation printers that use continuous ink supply, it is a headache to encounter such problems. So how do you solve the problem that the printer does not recognize the ink cartridge?

After analyzing the causes of common faults, we finally came to the conclusion that the main reason for this may be because the printer’s waste ink tank is full. For this reason, we have given the following solutions:

In fact, for every part of an inkjet printer, it will be more or less lossy over time. The same is true for sublimation inkjet printers, which have fixed accessory life settings. When some accessories reach the end of their life, the printer will prompt that they cannot print.

Since the digital sublimation printer is easy to form waste ink during use, it is easy to cause the waste ink to be full. In this case, you can do two things: use the zeroing software to reset the printer motherboard to eliminate the printer settings; or replace the ink cartridge. Here we recommend users to adopt the latter. Because it is simply a simple zero, it is easy to cause the waste ink to leak and burn the machine.

Wide Format Sublimation Plotter Maintenance Tips in Daily Use

The wide format sublimation plotter manufacturer stated that no matter what kind of printer, it is necessary to pay attention to maintenance in daily use, so as to maximize the service life of the machine and reduce the cost. So how should the printer be maintained?

The maintenance tips for the sublimation plotter are as follows:

1. When transporting the printer, be sure to fix the car of the ink cartridge. It is not allowed to slide the car freely to prevent the accessories of the ink cartridge from being damaged, resulting in wear of the nozzle.

 

2. When the sublimation printing machine is not working, be sure to stop the spray in the spot (do not continue to flash for more than three hours) or moisturize the nozzle (the nozzle should not be exposed to air for more than 15 minutes when it stops working) ), because the volatility of the ink is large, the ink on the nozzle is quickly dried, which easily blocks the nozzle.

3. When there is a broken needle when printing, please do not rush to clean the nozzle. First, move the spray to the cleaning position to see if there is any ink under the nozzle or the fiber material is hanging at the nozzle. After confirming the cause of the broken needle of the nozzle, the nozzle is treated accordingly.

 

4. Ensure that the working environment of the wide format sublimation printer is ventilated, clean, and avoid direct sunlight to the ink supply system of the machine. The ink supply system must be sealed. The air filter must be added to the place where the atmosphere is connected. The equipment workplace should reduce dust as much as possible. The venue is guaranteed to be mopped once a day.

5. When the machine is not working, the car must be moved to the moisturizing position, and the nozzle should be moisturized with a moisturizing seat. The nozzle should not be directly exposed to the air without moisturizing.

Eco-Solvent Advertising Printer - Precautions For Printing Materials Selection

In order to make a high-quality advertisement with an eco-solvent advertising printer, Except for the perfect design in advance, choosing advertising materials is also very important. We all know that based on the premise of the printer, the material determines the quality and longevity of an inkjet advertisement.

The key points to select digital eco-solvent printer printing materials are as follows:

 

Choosing better printing material for the advertising inkjet printer will allow you to easily achieve the perfect print performance. For example, when choosing the medium for outdoor inkjet advertising, the car sticker is good in adhesion and anti-sunlight; outdoor crepe printing media is suitable for more romantic and elegant display occasions.

In the choice of indoor advertising materials, such as canvas for more romantic and elegant display, there is a certain oil painting texture, can be used for wedding photography, etc.; PP film is exquisite gel, high precision, but there is no self-contained rubber surface, customers can use double-sided adhesive tape on the wall, can be used multiple times; exquisite paper, high precision, no self-adhesive rubber surface.

 

The setting of the size of the advertising inkjet image of the flex banner printer also needs everyone’s attention. Usually, in the design of the indoor and outdoor inkjet advertisements, it is necessary to predict the size of the advertisement, and select the medium according to different material media. Because the size of the printing material is 0.914, 1.07, 1.27, and 1.52 meters wide, it is recommended to use a 2cm smaller than the raw material, or it can be imprinted. It should be noted here that try not to set useless white edges, which is also the calculation of consumables and production costs, which can effectively reduce the cost of production.

Five Reasons for the Discoloration of Digital Sublimation Fabric Printers

Sometimes the digital sublimation fabric printer will have a unique print colour. Why is there a coloration cast? Here I will quickly introduce the motives for everyone.There are 5 most important motives for the printer’s colour cast:

First, if you prefer to compare, you can’t assume the dye-sublimation printer to print the identical color as the computer, due to the fact the display is RGB genuine color, huge shade gamut; the inkjet printer is CMYK false color, so the colour gamut is narrow. The software computerized conversion mode will drop some colors, which is normal. The accepted solution is to regulate the colour forged by way of decreasing the amount of yellow in the Y channel, fine-tuning each time and then adjusting it multiple times. Of course, you can additionally ask the grasp to assist you modify the curve, and shop it after satisfaction, simply spend some money, there are specialised technicians responsible for processing the image.

Second, coloration distortion is also associated to laptop coloration management, display resolution, digital printer resolution, and print media. The distinction in display resolution and printer resolution can additionally end result in a shade solid of the printed color. So attempt to pick out to edit and print the photo at the equal resolution. At the same time, the switch fee of the print medium will additionally have an effect on the colour of the pattern printed on the paper. Therefore, it is also vital to choose a transfer paper of high first-class and excessive switch rate.

Third, if you want to set up four or greater nozzles for sublimation inkjet printers, please test if they are the equal brand. Because the ink shade of the equal manufacturer of printer has a suitable complementarity and coordination, therefore making sure the replica of its color.

Fourth, check if the sublimation printer nozzle is broken or if the massive ink bottle is out of ink. If the ink is missing, the printed coloration will of course fade. At the identical time, it is additionally indispensable to test whether the printing method is adjusted to the ink saving mode, and if it is not indispensable to save ink, it ought to be again to the everyday mode.

Fifth: Please test the mode of Photoshop is RGB or CMYK before printing. When printing the picture with the printer, exchange the mode of the image to CMYK, so that the color of the printed photo will be seen on your computer. The colours are the same.